Geplo Kunststofftechnik
schwimmsauger.com floating-strainer.com
email: [email protected] Tel. 0664 3077666
Schwimmsauger
Frei schwimmend sinkt der Schwimmsaugkopf ca. 15cm ein und saugt die mittlere, meist saubere Wasserschicht auf.
Schlamm und Sand vom Boden und Treibgut von der Oberfläche gelangen nicht an das Saugsieb.
Löschteiche: Die meist dicke Schlammschicht vom Grund wird nicht aufgewühlt. Das laufende Verstopfen des Saugkopfs
wird vermieden. Mit seinem extra großen Saugsieb funktioniert er auch problemlos auf oder zwischen Wasserpflanzen.
Rinnsale: Wasser lässt sich selbst aus kleinsten Wasserläufen holen. Auf Schotteruntergrund genügen ein paar cm Wassertiefe.
Langwieriges Aufstauen oder Löcher graben ist nicht mehr nötig.
Keller auspumpen: Große Wassermengen werden bis auf wenige Zentimeter Tiefe rasch bewältigt.
Schwimmkörper ist aus unverwüstlichem Polyethylen hergestellt. Sieb aus A2-Edelstahl Lochblech.
Entwickelt und produziert in St Pankraz, Österreich.
Schwimmsauger S50
Gewicht: ca. 7kg
Maße:570 x 380 x 200mm
Anschluss standard: Storz A 110mm
Auf Bestellung können wir jede Kupplung von 100 bis 125mm einbauen
Preis: 620.- inkl Ust
Schwimmsauger S20
Gewicht: ca. 3kg
Maße:410 x 260 x 150mm
Anschluß: Storz B 75mm, Storz C 52mm
Preis: 540.- inkl Ust
floating strainer
Swimming freely the head of the floating strainer will sink about 15cm deep into the water and suck in the middle, mostly clean layer of water.
Mud and sand from the ground and flotsam from the surface area will not be able to reach the floating suction strainer.
Fire protection pond: The mud layer at the bottom of the pond will not be churned up in order to avoid continuous clogging of the suction head.
Because of its large suction strainer it is also possible to use the S50 on or between water plants.
Rivulets: Using this model will allow you to get water out of the smallest watercourses. On a gravelly ground only a few centimetres of water
depth will be enough. Building time-expensive dams or digging holes will no longer be necessary.
Pumping out cellars: Big amounts of water can be handled quickly down to only a few centimetres.
The floating body is made of indestructible Polyethylen, the strainer of A2-stainless steel perforated plate.
Developed and produced in St. Pankraz, Austria
Floating strainer S50
weight: ~ 7kg measurements: 570x380x200 mm
connection standard: Storz A 110mm coupling
also available with any other coupling between 100mm and 125mm
price: 620.- incl. VAT
Floating strainer S20
weight: ~ 3kg measurements: 410x260x190 mm
connection: Storz B 75mm, Storz C 52mm
price: 540.- Incl. VAT